دوره 9، شماره 1 - ( 12-1397 )                   جلد 9 شماره 1 صفحات 2918-2908 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Motaharinezhad M, Rahi A. Sensitivity Analysis of Different Parameters Affecting Thermal Contact Conductance . ASE 2019; 9 (1) :2908-2918
URL: http://www.iust.ac.ir/ijae/article-1-449-fa.html
Sensitivity Analysis of Different Parameters Affecting Thermal Contact Conductance . Automotive Science and Engineering. 1397; 9 (1) :2908-2918

URL: http://www.iust.ac.ir/ijae/article-1-449-fa.html


چکیده:   (20639 مشاهده)
In internal combustion engines, exhaust valve and its seat gain considerable temperature as the hot gases exit through them. So, the rate of heat transfer should be under control. In this study, the contact heat transfer coefficient has been estimated. An experimental study on an Air-Cooled internal combustion engine cylinder head has been considered. Using the measured temperatures of sensors located in specific locations of the exhaust valve and the seat and the method of linear extrapolation, the surface contact temperatures and constant and periodic contact heat transfer coefficient were calculated. Also, a sensitivity analysis has been done to study the effects of different parameters of contact pressure, contact frequency, heat flux and cooling air speed on thermal contact conductance. The results show that between the major four considered parameters, the thermal contact conductance is more sensitive to the contact pressure, then the contact frequency, heat flux and the cooling air speed are the most affecting parameters on thermal contact resistance.
متن کامل [PDF 1423 kb]   (4539 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: سوخت های جایگزین

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb