دوره 2، شماره 3 - ( 4-1391 )
جلد 2 شماره 3 صفحات 192-180 |
برگشت به فهرست نسخه ها
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mirzaamiri, Esfahanian, Ziaei-Rad. Crash Test Simulation and Structure Improvement of IKCO 2624 Truck According to ECE-R29 Regulation . ASE 2012; 2 (3) :180-192
URL: http://www.iust.ac.ir/ijae/article-1-145-fa.html
URL: http://www.iust.ac.ir/ijae/article-1-145-fa.html
Crash Test Simulation and Structure Improvement of IKCO 2624 Truck According to ECE-R29 Regulation . Automotive Science and Engineering. 1391; 2 (3) :180-192
چکیده: (24221 مشاهده)
During the design and development of truck cabins, the safety of the driver and the front seat passenger in
an accident is an important task and should be considered. The cab must be designed in such a way that in
an accident a sufficient survival space is guaranteed. The aim of this study is to investigate the behavior of
Iran Khodro (IKCO) 2624 truck subjected to a complex crash test according to regulation ECE-R29. This
regulation is a comprehensive European regulation consisting of three tests: 1-Front impact test (Test A), 2-
Roof strength test (Test B), 3-Rear wall strength test (Test C). These tests do not consider the safety of the
occupant directly however, a III-50th% dummy was used to assess the cab’s deformations relative to the
driver survival space. A 3D finite element model of the cab and chassis was developed and subjected to
tests by using LS-DYNA software. The results indicate that the cab complied with Test A and C
successfully while it passed Test B marginally. Finally, two solutions are suggested and implemented to
improve the cab’s response for Test B.
نوع مطالعه: پژوهشي |
موضوع مقاله:
موتور احتراق داخلی
| بازنشر اطلاعات | |
 | این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است. |
