دوره 1، شماره 1 - ( 10-1389 )                   جلد 1 شماره 1 صفحات 37-29 | برگشت به فهرست نسخه ها

XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Nemati A, Khalilarya S, Jafarmadar S, khatamnejhad H, Fathi V. Effect of Injection Characteristics on Emissions and Combustion of a Gasoline Fuelled Partially-premixed Compression Ignition Engine. ASE 2011; 1 (1) :29-37
URL: http://www.iust.ac.ir/ijae/article-1-7-fa.html
Effect of Injection Characteristics on Emissions and Combustion of a Gasoline Fuelled Partially-premixed Compression Ignition Engine. Automotive Science and Engineering. 1389; 1 (1) :29-37

URL: http://www.iust.ac.ir/ijae/article-1-7-fa.html


چکیده:   (27129 مشاهده)
Conventional compression ignition (CI) engines are known for their high thermal efficiency compared to spark ignited (SI) engines. Gasoline because of its higher ignition delay has much lower soot emission in comparison with diesel fuel. Using double injection strategy reduces the maximum heat release rate that leads to NOx emission reduction. In this paper, a numerical study of a gasoline fuelled heavy duty Caterpillar 3401 engine was conducted via three dimensional computational fluid dynamics (CFD) procedures and compared with experimental data. The model results show a good agreement with experimental data. To have a better design the effect of injection characteristics such as, the main SOI timing, injection duration and nozzle hole size investigated on combustion and emissions and an optimized point find. The results suggest an optimization in injection characteristics for simultaneous reduction of NOx and soot emissions with negligible change in IMEP.
متن کامل [PDF 399 kb]   (7136 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: سوخت های جایگزین

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb