Automotive Science and Engineering
Iran University of Science & Technology
Sat, Jul 27, 2024
[Archive]
Volume 13, Issue 2 (6-2023)
ASE 2023, 13(2): 4085-4091 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Bidadi J, Hampaiyan Miandowab1 H, Saeidi Googarchin H. Experimental and Numerical Investigation of the Performance of Automotive Adhesively Bonded Crash Box Beams Under Transverse Loading. ASE 2023; 13 (2) :4085-4091
URL: http://www.iust.ac.ir/ijae/article-1-637-en.html
URL: http://www.iust.ac.ir/ijae/article-1-637-en.html
Iran University of Science and Technology (IUST)
Abstract: (4437 Views)
The aim of the study was to examine the deformation modes and also degradation of an adhesively bonded rectangular cross section beam used in the automotive body structure. The study included: (1) performing new experimental investigations on the three-point bend behavior of a rectangular cross section beam made by adhesive bonding method. (2) developing a finite element (FE) model to predict the mechanical load displacement behavior and also the degradation modes (i.e. delamination between the adhesive layer and beam wall). The agreement between experimental and FE results demonstrates that the investigated structural element's numerical model was created utilizing accurate assumptions. Finally, the effects of beam wall thickness and overlap length have been investigated in a parametric study using the validated FE model. It was shown that increasing the beam wall thickness resulted in delamination between the adhesive layer and beam wall.
Keywords: Thin-walled beam
Adhesive joint
Energy absorption
Cohesive zone model (CZM)
Automotive bumper beam
Type of Study: Research |
Subject:
Body structure
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
