دوره 12، شماره 2 - ( 3-1401 )                   جلد 12 شماره 2 صفحات 3846-3838 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Moosavian A, Hosseini A, Jafari S M, Chitsaz I, Baradaran Shokouhi S. Machine Vision–Based Measurement Approach for Engine Accessory Belt Transverse Vibration Based on Deep Learning Method. ASE 2022; 12 (2) :3838-3846
URL: http://www.iust.ac.ir/ijae/article-1-611-fa.html
Machine Vision–Based Measurement Approach for Engine Accessory Belt Transverse Vibration Based on Deep Learning Method. Automotive Science and Engineering. 1401; 12 (2) :3838-3846

URL: http://www.iust.ac.ir/ijae/article-1-611-fa.html


چکیده:   (3961 مشاهده)
In this paper, to address the problem of using displacement sensors in measuring the transverse vibration of engine accessory belt, a novel non-contact method based on machine vision and Mask-RCNN model is proposed. Mask-RCNN model was trained using the videos captured by a high speed camera. The results showed that RCNN model had an accuracy of 93% in detection of the accessory belt during the test. Afterward, the belt curve was obtained by a polynomial regression to obtain its performance parameters. The results showed that normal vibration of the center of the belt was in the range of 2 to 3 mm, but the maximum vibration was 8.7 mm and happened in the engine speed of 4200 rpm. Also, vibration frequency of the belt was obtained 124 Hz. Moreover, the minimum belt oscillation occurred at the beginning point of the belt on the TVD pulley, whereas the maximum oscillation occurred at a point close to the center of the belt at a distance of 16 mm from it. The results show that the proposed method can effectively be used for determination of the transvers vibration of the engine accessory belts, because despite the precise measurement of the belt vibration at any point, can provide the instantaneous position curve of all belt points and the equation of the belt curve at any moment. Useful information such as the belt point having the maximum vibration, belt slope, vibration frequency and scatter band of the belt vibration can be obtained as well.
متن کامل [PDF 507 kb]   (3099 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: موتور احتراق داخلی

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb