دوره 11، شماره 3 - ( 6-1400 )                   جلد 11 شماره 3 صفحات 3619-3614 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Majidi-Jirandehi A A, Mohammadi Soleymani M, Dehghani H. Determine the Useful Life of Catalytic Converter and Standard Revision of Technical Inspection Centers. ASE 2021; 11 (3) :3614-3619
URL: http://www.iust.ac.ir/ijae/article-1-590-fa.html
Determine the Useful Life of Catalytic Converter and Standard Revision of Technical Inspection Centers. Automotive Science and Engineering. 1400; 11 (3) :3614-3619

URL: http://www.iust.ac.ir/ijae/article-1-590-fa.html


چکیده:   (5599 مشاهده)
Today, many car manufacturers can achieve emission standards through catalytic converters. The goals of this research was in tow sections. Initially, the amount of pollutants was measured to determine the role of the catalytic converters in the reduction of pollutants for 3 types of vehicles and in 50 cases, in the two stages before and after the catalytic converter. Then, to achieve the useful life of the catalytic converter, out of 750 test vehicle emissions were tested. Data analysis was done by SPSS software, which shows that catalytic converters can reduce up to 80% of exhaust emissions. This is independent of the type of vehicle. The useful life of the catalytic converters is up to 36 months, so they should be replaced at least every three years. Also, the pollutant standards of the technical examination centers are reviewed. For this purpose, the pollutants have been measured in 2200 vehicles. Due to the huge difference in technology, cars are divided into two main categories of carburetor and injector and are analyzed statistically. Eventually, for each group of these vehicles, the values of HC, CO and O2 are obtained.
متن کامل [PDF 597 kb]   (5273 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: تست و استاندارد

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb