دوره 11، شماره 1 - ( 12-1399 )                   جلد 11 شماره 1 صفحات 3533-3514 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Pahlavani M, Marzbanrad J. Energy absorption study of warm-rolled dual-phase LZ71 magnesium alloy hollow tube using ANN. ASE 2021; 11 (1) :3514-3533
URL: http://www.iust.ac.ir/ijae/article-1-499-fa.html
Energy absorption study of warm-rolled dual-phase LZ71 magnesium alloy hollow tube using ANN. Automotive Science and Engineering. 1399; 11 (1) :3514-3533

URL: http://www.iust.ac.ir/ijae/article-1-499-fa.html


چکیده:   (11089 مشاهده)
In the present work, the energy absorption study of warm-rolled LZ71 sheet is done for the first time. To do so, Lithium (7% Wt), Zinc (1% Wt) and Magnesium are cast in 770⁰C. After that, the billet has been warm-rolled at 350⁰C and its thickness reduced by 80%. Then, two different heat treatment situations are studied to reach an isotropic plate. Afterward, microstructures of the specimens have been studied using an optical microscope. Tensile tests of the samples are derived to study the mechanical properties and isotropy of the sheets. Moreover, the results of tensile tests applied for crushing simulations. Energy absorption study of the alloy is also done using ABAQUS/Explicit commercial code. The results of simulations are validated using experimental tests of A6082 and completely acceptable performance of simulations is observed. Then, the mechanical properties of LZ71 are used to study the crashworthiness behavior of the mentioned alloy. Crash absorption parameters, namely peak crush force (FMax), mean crush force (FMean), Total Energy Absorption (TAE), Crush Force Efficiency (CFE), Specific Energy Absorption (SEA) and Total Efficiency (TE) of LZ71 and A6082 are compared which are shown that the performance of LZ71 is considerably more efficient than A6082. Lastly, by the help of Artificial Neural Network (ANN) and Taguchi Method, the effects of dimensional parameters of tube, namely diameter, length and thickness, on FMax, FMean and TAE and also the influences of dimensionless geometrical ratios, namely L/D and D/t on CFE, SEA and TE are surveyed comprehensively.
متن کامل [PDF 2715 kb]   (6196 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: سازه

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb