دوره 4، شماره 3 - ( 6-1393 )                   جلد 4 شماره 3 صفحات 804-792 | برگشت به فهرست نسخه ها

XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Kakaee A, Rahnama P, Paykani A. Numerical Study of Reactivity Controlled Compression Ignition (RCCI) Combustion in a Heavy-Duty Diesel Engine Using 3D-CFD Coupled with Chemical Kinetics. ISE. 2014; 4 (3) :792-804
URL: http://www.iust.ac.ir/ijae/article-1-277-fa.html
Numerical Study of Reactivity Controlled Compression Ignition (RCCI) Combustion in a Heavy-Duty Diesel Engine Using 3D-CFD Coupled with Chemical Kinetics. مجله علمی پژوهشی مهندسی خودرو. 1393; 4 (3) :804-792

URL: http://www.iust.ac.ir/ijae/article-1-277-fa.html


چکیده:   (19352 مشاهده)

In this paper, a numerical study is performed to provide the combustion and emission characteristics resulting from fuel-reactivity controlled compression ignition (RCCI) combustion mode in a heavy-duty, single-cylinder diesel engine with gasoline and diesel fuels. In RCCI strategy in-cylinder fuel blending is used to develop fuel reactivity gradients in the combustion chamber that result in a broad combustion event and reduced pressure rise rates (PRR). RCCI has been demonstrated to yield low NOx and soot with high thermal efficiency in light and heavy-duty engines. KIVA-CHEMKIN code with a reduced primary reference fuel (PRF) mechanism are implemented to study injection timings of high reactivity fuel (i.e., diesel) and low reactivity fuel percentages (i.e., gasoline) at a constant engine speed of 1300 rpm and medium load of 9 bar indicated mean effective pressure (IMEP). Significant reduction in nitrogen oxide (NOx), while 49% gross indicated efficiency (GIE) were achieved successfully through the RCCI combustion mode. The parametric study of the RCCI combustion mode revealed that the peak cylinder pressure rise rate (PPRR) of the RCCI combustion mode could be controlled by several physical parameters – PRF number, and start of injection (SOI) timing of directly injected fuel.

متن کامل [PDF 795 kb]   (4814 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: موتور احتراق داخلی

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2022 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb