دوره 10، شماره 1 - ( 1-1399 )                   جلد 10 شماره 1 صفحات 3157-3149 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Pakdel Bonab S, Kazerooni A, Payganeh G, Esfahanian M. Extracting Tehran Refuse Collection Truck Driving Cycle and Estimating the Braking Energy. ISE. 2020; 10 (1) :3149-3157
URL: http://www.iust.ac.ir/ijae/article-1-522-fa.html
Extracting Tehran Refuse Collection Truck Driving Cycle and Estimating the Braking Energy. مجله علمی پژوهشی مهندسی خودرو. 1399; 10 (1) :3157-3149

URL: http://www.iust.ac.ir/ijae/article-1-522-fa.html


چکیده:   (6143 مشاهده)
Driving cycle is used to assess fuel consumption, pollutant emissions and performance of the vehicle. The aim of this paper is to extract the driving cycle for refuse collection truck and estimate its braking energy. For this purpose, after selecting the target truck and geographic area, the equipment needed to measure the required variables were prepared and mounted on the truck. Then, the actual data were collected from the performance of the target Truck while performing its mission. Since the amount of braking energy depends on the speed, truck mass and road grade, the speed of the vehicle is measured simultaneously with the truck mass and road grade. The collected data are then processed and subdivided into micro-trips. The micro-trips are clustered according to the number of state spaces using the K-Means algorithm. Next, the representative micro trips are selected from within the clusters and the final driving cycle is generated. The representative driving cycle shows that the truck speed is zero at 47% of the working time. Finally, the amount of braking power and accumulative braking energy in the driving cycle is calculated.
متن کامل [PDF 848 kb]   (1485 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: تست و استاندارد

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2022 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb