Volume 6, Number 1 (3-2016)                   IJAE 2016, 6(1): 2118-2126 | Back to browse issues page

XML Print

Abstract:   (457 Views)

In this study, the fluid flow around a Pride vehicle was solved in a two-dimensional design using numerical methods. To do so, a two-dimensional figure of a Pride was modeled and gridded, and different surfaces were introduced. Then, governing equations the fluid flow was solved for the standard K-ε model and the appropriate boundary conditions. Areas that increased lift and drag forces were specified through studying the results and observing flow lines, pressure distribution, and vortices created around the automobile. In this way, the ideal height for different speeds was determined through examining the changes in those forces at different heights. In this study, the Pride was examined at different heights 80, 120, 160 (standard), 200, and 250 mm for the speeds 10, 20, 33, and 40 m/s. The results showed that lift and drag forces depended on the height of the automobile and changed at different heights

Full-Text [PDF 461 kb]   (118 Downloads)    
Type of Study: Research | Subject: General
Received: 2017/06/11 | Accepted: 2017/06/11 | Published: 2017/06/11