دوره 4، شماره 3 - ( 6-1393 )                   جلد 4 شماره 3 صفحات 758-768 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Das S, Nayak R, Dhupal D, Kumar A. Surface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects. IJAE. 2014; 4 (3) :758-768
URL: http://www.iust.ac.ir/ijae/article-1-275-fa.html
Surface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects. مجله علمی پژوهشی مهندسی خودرو . 1393; 4 (3) :758-768

URL: http://www.iust.ac.ir/ijae/article-1-275-fa.html


چکیده:   (1849 مشاهده)
The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) are explored employing the analysis of variance (ANOVA). An L9 Taguchi standard design of experiments procedure was used to develop the regression models for machining responses, within the range of parameters selected. Results show that, feed rate has statistical significance on surface roughness and the machining force is influenced principally by the feed rate and depth of cut whereas , cutting speed is the most significant factor for flank wear followed by cutting speed. The desirability function approach has been used for multi-response optimization. Based on the surface roughness, machining force and flank wear, optimized machining conditions were observed in the region 147 m/min cutting speed and 0.10 mm/rev feed rate and 0.6 mm depth of cut.
متن کامل [PDF 235 kb]   (1302 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: عمومى
دریافت: ۱۳۹۳/۸/۲۰ | پذیرش: ۱۳۹۳/۸/۲۰ | انتشار: ۱۳۹۳/۸/۲۰

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
کد امنیتی را در کادر بنویسید

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2015 All Rights Reserved | International Journal of Automotive Engineering

Designed & Developed by : Yektaweb